MATERIAL SAFETY DATA SHEET
Date Created: 2022.06.30
Date Revised: 2024.03.18
SECTION I – PRODUCT INFORMATION / MANUFACTURER IDENTIFICATION
Product Name: Pepper Ball
Product Use: Tactical projectile for simulation and defense
Manufacturer Name: Lifeng Sports Development Co., Ltd.
SECTION II – COMPOSITION / INFORMATION ON INGREDIENTS
Payload Material:
Barium Sulfate, 1% OC (Capsicum Oleoresin), 4% PAVA (N-Vanillylnonanamide, C₁₇H₂₇NO₃)
Barium sulfate, BaSO₄ (CAS # 7727-43-7)
OC, Capsicum Oleoresin (CAS # 8023-77-6)
PAVA (NONIVAMIDE, N-Vanillylnonanamide, C₁₇H₂₇NO₃) (CAS # 2444-46-4)
Shell Material: PE dip plastic powder, Polyethylene Wax
Heavy Active Calcium Carbonate, Plastic Pigment Polyethylene Wax (CAS # 9002-88-4), Formula: (C₂H₄)ₙ
Heavy Active Calcium Carbonate (CAS # 471-34-1), Formula: CaCO₃
Synonyms: Carbonicacid calciumsalt; Limestone; Marble
SECTION III – PHYSICAL DATA / CHEMICAL PROPERTIES
Boiling Point: Not Applicable
Percent Volatile: 0%
Vapor Pressure (mmHg): Not Applicable
Appearance: Round in shape
Weight:
0.90 g (0.43")
1.3 g (0.50")
3.5 g (0.68")
Color: Multiple
Solubility in water: 0%
Odor: Odorless (no breakage), pungent smell (barrel breakage)
Evaporation Rate: 0
Caliber: 0.43 inch (10.9 mm), 0.50 inch (12.7 mm), 0.68 inch (17.3 mm)
Type: Powder Ball
SECTION IV – FIRE AND EXPLOSION HAZARD DATA
Explosion Data: Non-explosive. No upper or lower explosive limits.
Flash Point: Non-Flammable
Extinguishing Media: Use extinguishing media appropriate to surrounding fire conditions
Unusual Fire and Explosion Hazards: None
HMIS Rating:
Health: 1
Flammability: 0
Reactivity: 0
SECTION V – STABILITY AND REACTIVITY DATA
Chemical Stability: Stable
Incompatible/Materials to Avoid: None
Hazardous Decomposition Products: Will occur / Will not occur
Hazardous Polymerization Products: Will occur / Will not occur
SECTION VI – HAZARDS IDENTIFICATION
CAUTION: This material is a potentially hazardous mixture that may cause irritation to the eyes, skin, and mucous membranes. It is intended for use as an incapacitating agent and should be handled with extreme caution.
SECTION VII – FIRST AID MEASURES
Oral Exposure
Immediately rinse the mouth thoroughly with water; do not induce vomiting.
Never administer anything by mouth to an unconscious person.
Seek immediate medical advice or contact a poison control center.
Inhalation Exposure
Remove the patient from the contaminated area to fresh air immediately.
Ensure the patient is in a position that allows for easy breathing.
If breathing difficulties persist, administer oxygen if trained to do so and seek urgent medical attention.
Skin Exposure
Gently remove any residual material from the skin using a dry method (e.g., brushing).
Rinse the affected area thoroughly with clean water and wash with mild soap.
If irritation, allergic reaction, or a burning sensation occurs and persists, consult a medical practitioner or doctor.
Eye Exposure
Immediately flush the affected eye(s) with copious amounts of clean water for at least 15 minutes, holding the eyelid(s) open to ensure thorough rinsing.
Seek medical attention promptly if irritation, redness, or pain persists.
SECTION VIII – ACCIDENTAL RELEASE MEASURE
Personal Precautions
Wear appropriate personal protective equipment (PPE), including:
Respiratory Protection: NIOSH-approved respirator or self-contained breathing apparatus (SCBA)
Ventilation: Mechanical ventilation to keep exposure below recommended limits
Protective Gloves: Rubber, PVA, or neoprene
Eye Protection: Safety goggles or face shield
Skin Protection: Use appropriate barrier clothing
Ensure adequate ventilation in the spill area.
Containment and Cleanup
Sweep up material, place in bag, and hold for waste disposal.
Care should be taken to avoid causing dust to become airborne.
Ventilate the area and wash spill site with water after material pickup is complete.
Waste Disposal
Not considered a hazardous waste as referenced in 40 CFR 261.24 or 261.3.
SECTION IX – PRECAUTIONS FOR SAFE HANDLING AND STORAGE
Best store at 20°C (±5°C) with a maximum humidity of 50%. Keep in a moisture-proof package.
Failure to store properly may affect the performance and quality and increase the possibility of injury. Test results show weather resistance for its shape and performance from -20°C to 50°C.
Responsible individuals intend this product solely for use at 18 years of age or above. All personnel using the product are required to adhere to generally accepted safety standards.
Never launch the product in excess of 300 feet per second or at a range closer than 20 feet. Failure to follow these precautions may result in body injuries not only limited to face, eye, and ear injury, blindness, deafness, or even death.
Dispose of in municipal waste in accordance with Federal, State, or Local regulations, or offer for recycling if appropriate for the area.
SECTION X – TRANSPORTATION INFORMATION
DOT Classification: Class 55
Hazard Class: Not considered a hazardous material
SECTION XI – ENVIRONMENTAL IMPACT
Conclusion of SGS: Based on the performed tests on submitted sample, the results comply with the RoHS Directive 2002/95/EC and its subsequent amendment.
RoHS Directive 2005/618/EC (Amendments of RoHS Directive 2002/95/EC)
RoHS Directive 2002/95/EC
Conclusion of QMSI of NINGBO: Based on the performed tests on submitted sample, the results comply with the RoHS Directive 2005/618/EC.
California: This material does not contain any components listed under California Proposition 65.
Clean Air Act Amendments of 1990 (CAA 40 CFR): No components are listed as hazardous air pollutants.
The product is not made with nor does it contain any Class 1 or Class 2 ozone-depleting substances as defined under amendments to the act.
Clean Water Act (40 CFR 116): Not listed.
Canadian WHMIS: Not a controlled product.
CERCLA: Not a hazardous substance as referenced in 40 CFR 302.4. It is not on the list of hazardous substances under the Clean Water Act (40 CFR 116 and 117).
SECTION XII – OTHER INFORMATION
The information contained herein is believed to be accurate and reliable; however, no warranty either expressed or implied is made. Conditions under which this information may be applied are beyond our control, and we can assume no liability for results of its application. This product is designed to be used by persons having sufficient skill to make informed judgments regarding its application.
MSDS – Lifeng Sports Development Co., Ltd.
Date Created: 2022.06.30
Date Revised: 2024.03.18